1250 Mesh Dolomite Grinding Mill Powder Dolomite Grinding Mill Machine Price
Description
The dolomite mill is mainly suitable for superfine powder processing of non-flammable and explosive brittle materials with medium and low hardness and Mohs hardness ≤6, such as calcite, chalk, limestone, dolomite, carbon black, kaolin, Bentonite, talc, mica, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alumite, graphite, fluorite, phosphate rock More than 100 kinds of materials such as stone, potassium ore, pumice, etc., the particle size of the fine powder product can be adjusted arbitrarily between 10-40um (10um=1250 mesh), and the output can reach 45t/h.
【Performance of dolomite mill】:
1. High efficiency and energy saving: high grinding efficiency and low energy consumption, compared with ball mills, the energy consumption is 40%-50% lower;
2. The wearing parts have a long service life
Grinding rollers and grinding rings are forged with special materials, which greatly improves the utilization.
3. High safety and reliability
The grinding roller limit device is adopted to avoid the violent vibration caused by the material cut off during the working time of the mill;
4. High product fineness
5. Environmentally friendly and clean
Technical Parameters Table
| Specifications | HVM800 | HVM1250 | HVM1300 | HVM1500 | HVM1700 | HVM1750 | HVM1900 | HVM2400 | HVM2400 | HVM2500 |
| Grinding table median diameter(mm) | 800 | 1250 | 1300 | 1500 | 1700 | 1750 | 1900 | 2400 | 2400 | 2500 |
| Capacity(t/h) | 1-3 | 2-7 | 3-12 | 4-16 | 6-24 | 7-27 | 7-28 | 9-35 | 10-39 | 11-45 |
| Materials Grain Size(mm) | 0-15 | 0-20 | 0-25 | 0-35 | 0-35 | 0-35 | 0-40 | 0-40 | 0-40 | 0-50 |
| Materials Moisture(%) | ＜5 |
| Product Fineness(10-40um) | 97% |
| Product Moisture(%) | ≤1 |
| Main Motor Power(kw) | 55 | 132 | 180 | 250 | 355 | 400 | 450 | 560 | 630 | 710 |
Re:The data based on Mohs'hardness 3-4 material
The product fineness can reach 10 um(1250 meshes)
【Working Principle】
The motor drives the grinding disc to rotate through the reducer, the material falls into the center of the grinding disc from the feed inlet, and the hot air enters the mill from the air inlet. Under the action of centrifugal force, the material moves to the edge of the grinding disc, and is crushed by the grinding roller when passing through the annular groove on the grinding disc. The crushed material is carried by the high-speed airflow at the air ring at the edge of the grinding disc, and the large particles fall directly on the grinding disc. Re-grinding, when the material in the airflow passes through the dynamic and static separator, under the action of the rotating rotor, the coarse powder falls on the grinding disc for re-grinding, and the qualified fine powder is ground together with the airflow and collected in the powder collecting device, which is product. Moisture-containing materials are dried during contact with hot gas to achieve the required product moisture.
Product Tags:
|
|
oEM 1250 Mesh Calcium Carbonate Grinding Mill Machine Images
|
